Intel D865GVHZ User Manual

Page of 88
Using the BIOS Setup Program
67
Table 23.
Chipset Configuration Submenu (continued)
Feature
Options
Description
Extended Configuration
Default (default)
User Defined
Chooses the default or user defined settings for 
the extended configuration options.
Graphics Core Frequency
Auto (default)
266 MHz
333-320 MHz
Allows override of detected graphics core 
frequency value.
SDRAM Frequency
Auto (default)
266 MHz
333 MHz
400 MHz
Allows override of detected memory frequency 
value.
SDRAM Timing Control
Auto (default)
Manual – Aggressive
Manual – User Defined
Auto allows timings to be programmed according 
to the memory detected.
Manual – Aggressive selects the most aggressive 
user defined timings.
Manual – User Defined allows manual override of 
detected SDRAM settings.
CPC Override
Auto (default)
Enabled
Disabled
Controls Command Per Clock/1n rule mode.  
When enabled, allows DRAM controller to attempt 
Chip Select assertions in two consecutive 
common clocks.
SDRAM RAS Act. To Pre.
8 (default)
7
6
5
Selects length of time from read to pre-change.  
Corresponds to tRAS, min.
SDRAM CAS# Latency
2.0
2.5
3.0 (default)
Selects the number of clock cycles required to 
address a column in memory.  Corresponds 
to CL.
SDRAM RAS# to CAS# 
delay
4
3 (default)
2
Selects the number of clock cycles between 
addressing a row and addressing a column.  
Corresponds to tRCD.
SDRAM RAS# Precharge
4
3 (default)
2
Selects the length of time required before 
accessing a new row.