Lenovo RD540 User Manual
11. Press the two retaining latches. Then, the backplane is secured.
Figure 106. Securing the hot-swap hard-disk-drive backplane
12. Reinstall all the hot-swap hard disk drives and dummy trays (if any) on the backplane. See “Installing or
13. Refer to your note to reconnect the cables to the backplane.
14. If you are instructed to return the old hot-swap hard-disk-drive backplane, follow all packaging
instructions and use any packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the replacement, go to “Completing the parts replacement” on page 154.
Replacing the Intelligent Diagnostics Module
Attention: Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 67.
on page iii and “Guidelines” on page 67.
This topic provides instructions on how to replace the Intelligent Diagnostics Module (hereinafter referred to
as the IDM).
as the IDM).
The IDM provides diagnostic LEDs through the IDM panel to help you easily identify a problem. For more
information, see “Intelligent Diagnostics Module” on page 21.
information, see “Intelligent Diagnostics Module” on page 21.
136
ThinkServer RD540 User Guide and Hardware Maintenance Manual