SBE HW400c/2 User Manual

HighWire HW400c/2 User Reference Guide Rev 1.0

3.6.9 Zircon PM

-up, the Zircon PM is held in reset state until the 3.3V supply voltage is

within tolerance.

3.6.10 IMPI Get

The response to the IPMI command “GetDeviceID” from the Shelf Manager is of the

See Appendix A for the complete response format to

GetDeviceID.” Unique Product ID numbers (byte offsets 11 and 12) are assigned as

he three least significant bits of the Product ID numbers for the HW400c/2 board

are always “111” to maintain continuity with the earlier HW400 Product ID

ent scheme. The LSB value is also reflected in the Extended Type Register

(ETR) in the CPLD register bank. See

duct Features

(see Table 5)

Product ID number

(MSB, LSB)

Reset

At power

Device ID

standard format.

assignm

Table 26. Product ID number

HW400c/2 Pro

Standard Version

0x00, 0x07

October 10, 2006

Page