Hitachi 32PD5000 User Manual

ENGLISH

Remote control

ID SET button

POWER OFF button

POWER ON button

POWER ON/OFF button

MENU button

MUTE button

VOLUME UP/DOWN buttons

RETURN button

RECALL button

AUTO button

PinP button

ID button

SELECT/ADJUST buttons

OK button

Loading Batteries

1. Open the battery cover.

• Slide back and remove the battery

cover in the direction of the arrow.

2. Load batteries.

• Load two Size AA batteries included observing the correct

polarities.

3. Close the battery cover.

• Replace the battery cover in the direction of the arrow and snap

it back into place.

Use the remote control within about 5 m from front of the unit’s
remote-control sensor and within 30 degrees on both sides.

With in 30
degrees

About 5m

About 3m

With in 30
degrees

About 3m

AV1

AV2

RGB 1

RGB 2

AV3

MUTE

VOL

AV4

AUTO

PinP

SIZE

RECALL

ID SET

• Do not use new and old batteries together. The batteries could

explode or leak, resulting in fires, physical injury, or stains.

• When loading batteries, observe their correct polarities as

marked on the product. If loaded in the wrong direction, the
batteries could explode or leak, resulting in fires, physical injury,
or stains.

CAUTION

ATTENTION

• Do not drop or impact the remote control.
• Do not splash the remote control with water or put it on a wet

object to avoid possible failures.

• Before leaving the remote control out of use for an extended

period of time, remove the batteries from it.

• If the remote control begins to lack responsiveness, replace the

batteries.

• Strong light such as direct sunlight impinging on the

photoreceptor of the remote control can cause operational
failure. Position this unit to avoid direct contact with such light.

Handling the Remote Control

SIZE button

RGB/VIDEO buttons

AV1

AV2