Hitachi 32PD5000 User Manual

22

When Mode Display is set to ON,
the input signal is switched or
when the RECALL button is
pressed.

A guide is displayed for the input
terminal and the horizontal and
vertical sync frequency.

When the sync signal is no longer
detected.

• A guide displays No Sync.

Signal, and Power Save (for
approx. 5 sec.)

• When the condition continues

where the sync signal cannot be
detected, indicator lamp of
power source changes in
orange and the mode switches
to power save mode. 

Recheck the personal computer
power switch status and the
connection status.

When the input signal does not
match the monitor specifications
or is in an unstable status.

A guide displays Invalid Scan
Freq.

Recheck the input signal
specifications.

! No Sync. Signal

RGB2
RGB  

H :   48.4kHz

V :   60.1  Hz

      -- -- Min.

-- -- : -- --

! Invalid Scan Freq.

• When this unit is connected to a VESA DPMS computer, the Power Save (Off) mode can be set to be activated automatically when the

computer is not being used to reduce power consumption by this unit.

RGB sync signal

Horizontal

Yes

No

Yes

No

Vertical

Yes

Yes

No

No

PC signal

Active (normal display)

Blank (no display)

Operation mode

On

Off

Indicating lamp

Lights green

Lights orange

Power consumption

255W (32")
365W (42")

3W or less (RGB1)
1W or less (RGB2 ; 100V<AC<120V)
3W or less (RGB2 ; 120V<AC<240V)

• Operate the personal computer, or press either the INPUT SELECT button of the main unit or the RGB1/RGB2 buttons of the remote control.

01PDP-英語(QR58543)修正-三  03.10.6  5:32 PM  ページ22