EVGA 7150 User Manual

Page of 11
Expansion Slots 
The EVGA nForce motherboard contains four expansion slots, two PCI Express slots and 
two PCI slots.  
PCI Slots 
 
The two PCI slots support many expansion cards such as a LAN card, USB card, SCSI card 
and other cards that comply with PCI specifications. When installing a card into the PCI 
slot, be sure that it is fully seated. Secure the card’s metal bracket to the chassis back panel 
with the screw used to hold the blank cover. 
PCI Express x1 Slot 
There is one PCI Express x1 slot that is designed to accommodate less bandwidth-intensive 
cards, such as a modem or LAN card. The x1 slot provides 250 MB/sec bandwidth. 
PCI Express x16 Slot 
The PCI Express x16 slot is reserved for a graphics card. The bandwidth of the x16 slot is 
up to 4GB/sec (8GB/sec concurrent). When installing a PCI Express x16 card, be sure the 
retention clip snaps and locks the card into place. If the card is not seated properly, it could 
cause a short across the pins. Secure the card’s metal bracket to the chassis back panel with 
the screw used to hold the blank cover. 
Install your Operating System  
Boot up your machine, setup any hardware configurations within the BIOS setup if needed.  
Boot from your OS disk.  Once your operating system is installed use the provided driver 
disk to install the appropriate drivers.