Timex 75329T User Manual

Page of 4
SETTING THE CLOCK MANUALLY
  
Back of Clock
“Set” to confirm 
manual settings
Down 
Arrow
SET
Up 
Arrow
5
4
The future forecast feature automatically gives you the predicted weather forecast icon 
for the next 12 to 24 hours based on an advanced algorithm that analyzes barometric 
pressure changes and temperature. This weather forecaster will provide the most 
accurate forecast that a single stations instrument can provide.
Future Forecast Icon
a)  Press and HOLD the SET button until you see the selection of seven time zones
b)  Press the UP (
s
) ARROW repeatedly until you reach your time zone,
  then press SET then release.
a)  Press the UP (
s
) ARROW to turn DST (Daylight Saving Time) function on or 
off. Press “SET” to confirm then release.
b) The HOUR will flash
c) The MINUTE will flash
d) The YEAR will flash
e) The MONTH will flash
f) The 
DATE
will flash
e) The °F will flash
Press “SET”
to confirm
Press “SET”
to confirm
Press “SET”
to confirm
Press “SET”
to confirm
Press “SET”
to confirm
Press “SET”
to confirm
Press the UP (
s
) ARROW
repeatedly,
 until the correct hour (AM 
or PM) is displayed.
Press the UP (s) ARROW repeatedly, 
until the correct minute is displayed.
Press the UP (s) ARROW repeatedly, 
until the correct year is displayed.
Press the UP (s) ARROW repeatedly, 
until the correct month is displayed.
Press the UP (
s
) ARROW
repeatedly,
 until the correct date is 
displayed.
Press the UP (
s
) ARROW to change
between °F and °C.
  Press the UP (
s
) ARROW to or DOWN (
t
) ARROW buttons to turn OFF
 
Atomic signal
. This will stop the clock from searching for the Atomic radio
 signal.
NOTE: You do NOT need to turn off the atomic clock to set the time manually. Once the clock receives the signal, it will adjust the 
clock accordingl. However, you may choose to deactivate the atomic clock feature completely if you prefer to manually control 
the clock or if you live in a remote area that does not readily receive the atomic signal. As long as the atomic clock is ON, it will 
automaticlly adjust itself to the correct time, overriding your manual setting.
1) SETTING YOUR TIME ZONE
3) SETTING THE CLOCK & CALENDAR
2) TURNING ATOMIC CLOCK FEATURE ON/OFF
DAY OF THE WEEK WILL UPDATE AUTOMATICALLY AS YOU SET THE DATE
FUTURE WEATHER FORECAST ICONS WILL AUTOMATICALLY APPEAR ONCE BATTERIES 
ARE INSERTED
The “Weather Trend” directional arrow icon will indicate one of three barometric pressure 
trend directions. This will give an additional indicatin of future weather conditions
Weather Trend Icon
The main unit has a signal reception icon near the outdoor temperature display area.  If 
there are a low number of “bars” present, you may experience no temperature display 
(“--”) or inaccuracy.  In either case, you may need to relocate one of both of the units.  If 
most or all 4 of the bars are present, wireless reception is good and no action is required.
Wireless Signal Reception Icons
Strong
Reception
NO
Reception
falling: cloudy to stormy conditions likely
rising: clearing conditions likely
steady: current conditions will persist
HEAVY STORM
(severe weather conditions
are forecasted when flashing)
STORMY
MOSTLY
CLOUDY
PARTLY
CLOUDY
MOSTLY
SUNNY
rain or snow
rain or snow