Addonics Technologies RT3S5HEU3 User Manual

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST)   

Phone: 408-453-6212 

Email: www.addonics.com/support/query/

1.  Be sure the lock on each drive door is in an 

unlock position. If not, use the key that comes 

with the Disk Array to unlock the drive door. Pull 

on the door lever to swing open the drive door all 

the way.

2.  Slide a 3.5” SATA hard drive into the drive slot 

with the drive connector side facing in.  Be sure to 

orient the hard drive correctly as shown in the 

yellow label on the inside of the drive door – with 

drive door swing open at the bottom, the top of 

the hard drive should face to the right. 

3.  Once the drive is all the way into the drive slot, 

close the door all the way till the drive door latch 

securely. This will engage power and data 

connection with the hard drive.  The LED lit for 

the drive slot should lit if the Disk Array already 

powered on. You may lock the drive door with the 

key

4.  To remove the hard drive from the Disk Array, 

simply follow the step 2 – 3 in reverse.

Drive Power & Activity LED

for Each Drive Bay

Main Power LED

Door Lock

Individual

Drive Bay

Door

Power Jack

eSATA Port

USB 3.0/2.0 Host Port

Dip Switch