HP (Hewlett-Packard) 75 User Manual

The monitor power supply is provided with Automatic Line 
Switching (ALS). This feature allows the monitor to operate on 
input voltages between 100-120V or 200-240V.

The power cord set (flexible cord or wall plug) received with the 
monitor meets the requirements for use in the country where you 
purchased the equipment.

If you need to obtain a power cord for a different country, you 
should purchase a power cord that is approved for use in that 
country.

The power cord must be rated for the product and for the voltage 
and current marked on the product's electrical ratings label. The 
voltage and current rating of the cord should be greater than the 
voltage and current rating marked on the product. In addition, the 
cross-sectional area of the wire must be a minimum of 0.75 mm² 
or 18AWG, and the length of the cord must be between 6 feet 
(1.8 m) and 12 feet (3.6 m). If you have questions about the type 
of power cord to use, contact your HP authorized service 
provider.

A power cord should be routed so that it is not likely to be walked 
on or pinched by items placed upon it or against it. Particular 
attention should be paid to the plug, electrical outlet, and the 
point where the cord exits from the product.