HP (Hewlett-Packard) L1530 User Manual
B–4
User’s Guide
Technical Specifications
Entering User Modes
The video controller signal may occasionally call for a mode that
is not preset if:
is not preset if:
■
You are not using a standard graphics adapter.
■
You are not using a preset mode.
If this occurs, you may need to readjust the parameters of the
monitor screen by using the on-screen display. Your changes can
be made to any or all of these modes and saved in memory. The
monitor automatically stores the new setting, then recognizes the
new mode just as it does a preset mode. In addition to the 15
factory preset modes, there are 15 additional user modes that can
be entered and stored.
monitor screen by using the on-screen display. Your changes can
be made to any or all of these modes and saved in memory. The
monitor automatically stores the new setting, then recognizes the
new mode just as it does a preset mode. In addition to the 15
factory preset modes, there are 15 additional user modes that can
be entered and stored.
Power Consumption
<50 watts typical
Input Terminal
15-pin D-type connector with cable included.
DVI-D connector with DVI-D cable included
DVI-D connector with DVI-D cable included
Tilt Stand
Maximum tilt angle range (Tilt
range may vary depending on
height adjustment)
Maximum tilt angle range (Tilt
range may vary depending on
height adjustment)
Maximum Height adjustment
range
range
-5 to 90o
+
(25
o for operation)
(90
o for packing only)
2.56 in.
65 mm
Security Lock
Monitor cabinet is provided with a slot allowing
the use of a security lock device.
the use of a security lock device.
L1730 Model
17-inch Flat Panel Monitor (Continued)