Test-Um NT955 User Manual

Test-Um NT955 Series
3.3. Creating Template Information

The purpose of the Template file (*.tut file) is to avoid reentering

Company Information and/or Custom Cable Definitions for each job by

saving the information in a Template that can be used on multiple jobs.

You can also use an existing Job to create a Template.

Test-Um recommends creating one or more reusable Template files (*.tut

files) when you perform the initial setup on your Validator-NT. Each time

you create a New Job select the template that you created and make

changes to the information as necessary.

The most efficient way to create templates is by using the Plan-Um

software. See the section of the Plan-Um instruction booklet titled

Managing Job Files/Save and Export As Template for complete

instructions. Template files can be created and stored in Plan-Um

and uploaded to the Validator-NT as needed, or created directly in the

Validator-NT.

1. To enter Template Information using the Validator-NT keypad,

select Auto Test on the Start screen. Enter the Contractor and/or

Custom Cable Information that you wish to save as a template.

Press Quit to return to the Auto Test screen.

2. Select Job Utilities and navigate to the Export Tut button.

3. Use the alphanumeric keypad

to name the Template. Use the

Backspace (F1) and Delete

(F2) soft keys to edit the name

as required. Press Accept to

complete the name. Press

OK (F3) soft key to save the

template information under the

name entered.

4. The Template Information that you created contains contractor

and/or custom cable information associated with the current job.

You can use this template as it is or edit the information when

loaded into other jobs. You can also use an existing Job to create

a Template.

Validator

Managing Job Files

Validator

Managing Job Files

BACKSPC

Current File:

New Template:

Export
Untitled1.job

Untitled1.job

DELETE

Test-Um Inc.

validator

100%

2005 Aug 25

10:53:01