Test-Um NT955 User Manual

Test-Um NT955 Series
6.5. Step by Step Instructions for Performing Network Tests

1. From the Start Menu, select Network Tests. Choose

Port

Discovery, Ping Test or Hub Flash.

Warning! Network Test Results will NOT be saved

2. Use a patch cable to connect the Validator-NT main unit to the

jack or network device to be tested.

Port Discovery

1. From the Start menu, navigate to Network Tests using the arrow

keys which move from left to right on each row.

2. Using the RJ45 port, connect the appropriate cable assembly

from the Validator-NT main unit to one end of the cable or jack

and the remote unit to the opposite end of the cable or jack to be

identified.

3. Select Port Discovery to start a test sequence. Press TEST to

retest once the Port Discovery screen is displayed.

4. If neither voltage nor Ethernet is detected, the Validator-NT

searches for its remote to run a cable test. If a remote is not

found, a one-ended test for shorts and split pairs is run and the

results are reported.

Validator

Network Tests