Test-Um NT955 User Manual

91

Test-Um NT955 Series

Open the 

My Documents folder on your desktop.  Right click the Plan-

Um job you want to transfer, and select 

Copy. 

Power the Validator on. Open the 

My Computer folder on your desktop. 

Plug the USB cord into the USB port on your PC and into the Validator-

NT (Figure 6.1).  As the connection is made, the drive the Validator is 

mapped to (usually Local Disk E:) appears on your desktop and the 

message 

“USB – File I/O Mode” appears in red on the Validator.  

Right click the drive the Validator is connected to and select 

Paste to 

transfer the job file to the compact flash card on the Validator. 

Do not remove the USB cable after this procedure; instead follow the 

instructions below to safely remove the USB cable

On your system tray (lower right side on your desk top), click the USB 

icon to safely remove hardware or Stop Mass Storage Device.  

This completes the upload operation. Remove the USB cable from the 

Validator.  When you remove the USB cable, the power automatically 

turns off on the Validator.

Power the unit on, select Job Manager, and open the job to begin testing. 

After you complete the testing and verification of the cables with the 

Validator, you will download the test results to Plan-Um, populating the 

Length and Results columns on the Cable Test schedule. 

 

Validator

TM

 Uploading/Downloading Jobs