SATO 408E User Manual

Section 2: Installation

 

 Page 2-13

Before attempting to replace the print head, it is advisable to contact your local dealer or service 
center so that they can assist you in case of problems.

1. Make sure the printer has been turned off for at least 30 minutes so that the print head is not hot. 

Lift up the front cover.

2. Locate the center screw that secures the print head, as shown in 

the picture. Unscrew it so that the print head comes loose.

3. Push the Head Lock Lever (the purple slide lever) upwards. in the 
direction shown here.  

4. Pull the print head outwards and disconnect the two connectors 

attached to it.

Caution

• Do not touch the print head’s heating elements. If you do so inadvertently, use the 

cleaning pen (supplied) to clean the area thoroughly. For more details, see Section 4, 
Cleaning and Maintenance.

5. Insert the replacement print head and connect the two connectors 

to it.

6. Mount the print head back into the original location and remount 

the center screw that secures it.

7. Turn the Head Lock Lever clockwise and lock the print head 

assembly in place.