Hobart SLA-1 User Manual
© HOBART 2006
Page 7 of 12
F33995 (Rev. A, 6/06)
3. Use the numeric keypad to enter PLU number in the Product
number and PRESS [ENTER].
4. PRESS [F2] to select Apply Security Label.
5. PRESS [ESC] to return to the Start a Run screen.
Operating the SLA
Once set up, the SLA runs with minimal operator intervention.
The labels are automatically generated, combined and placed
on the appropriate package.
The SLA contains a label sensor to alert the operator when out
of labels or when labels are not advancing. When the sensor
does not find a label edge in 5 seconds, the message Out of
Security Labels displays on the Ultima console and a beep
sounds to alert the operator.
The labels are automatically generated, combined and placed
on the appropriate package.
The SLA contains a label sensor to alert the operator when out
of labels or when labels are not advancing. When the sensor
does not find a label edge in 5 seconds, the message Out of
Security Labels displays on the Ultima console and a beep
sounds to alert the operator.
Note
If used with an HSW or NSW Semi Automatic System, the
security label is automatically placed on the scale label, but the
Operator must hand apply the labels to the package.
security label is automatically placed on the scale label, but the
Operator must hand apply the labels to the package.