Zebra Technologies APL-I User Manual

Commands
Print Commands

14177L-003 

APL-I  Reference Guide

11/24/09

Purpose  To send the user-defined command and protocol tables so that the printer gets to 
download a new command set.

<ESC>Z

This command does not work on the Zebra printer with APL-I, or it has 

significant deviations from the 3400D printer.

Purpose  To reset the printer after other commands in the buffer are executed.

<BS>

Based on testing, this command works the same on the Zebra printer with 

APL-I firmware as on the 3400D printer.

This command is executed after all previous commands are completed. Any 

information sent after this command is lost. When configuration commands require a printer 
reset, use this command.