Zebra Technologies APL-I User Manual
Commands
Program Mode Commands
Program Mode Commands
78
14177L-003
APL-I Reference Guide
11/24/09
User-Defined Character, Clear or Create
Purpose To clear or create graphic bitmaps.
Syntax
Gn
Supported
Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes
The printer erases and redefines a graphic after you define it.
Default Value: NONE
Accepted values for n: 0 – 99
Accepted values for n: 0 – 99
User-Defined Character Field, Create or Edit
Purpose To create or edit a graphical field.
Syntax
Un
Supported
Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes
The name parameter is optional and can consist of 8 ASCII characters (excluding the
semicolon) and cannot start with a number.
Default Value: n = 0
Accepted values for n: 0 – 199
Default Value: n = 0
Accepted values for n: 0 – 199
User-Defined Font Character, Create
Purpose To identify the next font to be defined.
Syntax
tn
Supported
Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes
n is a decimal representation of an ASCII character. Existing characters are erased by
the printer.
Default Value: NONE
Accepted values for n: 0 – 255
Default Value: NONE
Accepted values for n: 0 – 255