Philips 253118301-A User Manual

- 15 -

2 Push the lower panel down until it clicks.

3 Setup the back side feed cassette stop by pushing 

the "PUSH" lever (A).

 

Then adjust the lateral paper guides to the paper 
format by pushing lever (B) located on the left 
guide. Adjust the length paper guide to the paper 
format by pushing lever (C).

4 Take a paper stack, pull the paper off and align it 

on a flat surface.

5 Put the paper stack in the feed cassette 

(200 sheets of 80 g/m² paper for instance).

6 Put the feed cassette back in its location.

1 Stand in front of the machine.
2 Push the left and right sides of the cover and pull it 

towards you at the same time.

3 Unpack the new cartridge. Gently roll the cartridge 

5 or 6 times to distribute the toner evenly inside the 
cartridge. Thoroughly rolling the cartridge will 
assure the maximum copies per cartridge.

 

Hold it by its handle.

4 Insert the cartridge in its slot by pushing it until it 

clicks (last move down) as shown on the picture 
below. 

5 Close the cover.