Multi Tech Equipment MT5634ZBA-V-V92 User Manual
4 AT Commands, S-Registers, & Result Codes
30
MultiModemZBA-V-V92 User Guide
Command:
%H
n Direct Connect Enable
Values:
n = 0, 1
Default:
0
Description:
%H0 Sets callback security to normal operation.
%H1 All callback security calls will be direct connect regardless of
%H1 All callback security calls will be direct connect regardless of
whether the password or phone number has the - character.
Command:
%R
n Cisco Configuration
Values:
n = 0, 1
Default:
0
Description:
%R0 Disables Cisco configuration.
%R1 Sets E0, Q1, &D0, \N0, $SB9600, and %S1 for operation with
%R1 Sets E0, Q1, &D0, \N0, $SB9600, and %S1 for operation with
a Cisco router.
Command:
%S
n Command Speed Response
Values:
n = 0, 1
Default:
0
Description:
%S0 Sets modem to respond to AT commands at all normal speeds.
%S1 AT commands accepted at 115200 bps only. AT commands at
other speeds are ignored.
Command:
$D
n
DTR Dialing
Values:
n = 0 or 1
Default:
0
Description:
$D0
Disables DTR dialing.
$D1
Dials the number in memory location 0 when DTR goes high.
Command:
$EB
n Asynchronous Word Length
Values:
n = 0 or 1
Default:
0
Description:
$EB0 Enables 10-bit mode.
$EB1 Enables 11-bit mode.
$EB1 Enables 11-bit mode.
Command:
$SB
n
Serial Port Baud Rate
Values:
n = speed in bits per second
Default:
57600
Description: $SB300
Set serial port to 300 bps.
$SB1200
Set serial port to 1200 bps.
$SB2400
Set serial port to 2400 bps.
$SB4800
Set serial port to 4800 bps.
$SB9600
Set serial port to 9600 bps.
$SB19200
Set serial port to 19200 bps.
$SB38400
Set serial port to 38400 bps.
$SB57600
Set serial port to 57600 bps.
$SB115200 Set serial port to 115200 bps.