Multi-Tech Systems MTCBA-E-EN User Manual

Chapter 3 – Using the Web Management Software 

Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375F) 

 

 

 

 

The Web Management software configures the Ethernet functionality of your MultiModem.  
 

This section explains the menu structure and the navigation buttons of the router’s Web Management software.   

Sets up a General Configuration, HTTP, DDNS, SNTP, Static Routes, and Remote Configuration. 

Sets up the PPP authentication,

dial-on-demand, modem authentication, and Wakeup on Call. 

Defines networks and services to make them available to other functions such as 
allowed packet filters, DHCP Server, and Statistics & Logs.

 

Defines filter rules, DNAT configuration, and ICMP rules. 

Generic Routing Encapsulation (GRE). Defines the remote network and the tunnel through 

which traffic is to be routed.

Configures the DHCP server settings. 

Sets DDNS Force Update and Reset Modem, displays Service Status, and provides screens for  

Firmware Upgrade, Load Configuration, and Save Configuration. 

Shows statistics and logs maintained by the modem. 

Saves your settings and reboots your PC. 

Accesses the online Help text. 

 

IMPORTANT NOTE ABOUT SUBMIT AND SAVE & RESTART 

Click the Submit button located at the bottom of most screens in order to save any changes you make.  

Then you must click the Save & Restart button, located on the Menu bar, in order for your settings to take effect. 
Save & Restart 

does not have to be executed after each screen; you can change and Submit several screens, and 

then click Save & Restart.