Manualsbrain.com
  1. Manuals
  2. Brands
  3. Multi-Tech Systems
  4. MTCBA-E-EN
  5. User Manual

Multi-Tech Systems MTCBA-E-EN User Manual

Download
Page of 60
Chapter 3 – Using the Web Management Software 
Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375F) 
23
 
 
General Configuration 
Date and Time:
 The system date and time display in these formats: DD/MM/YYYY / HH:MM:SS. SNTP Client 
must be enabled and you must have a live Internet connection for the date and time to display correctly. 
IP Configuration 
Enter the following addresses for the Ethernet interface.  
IP Address (Default = 192.168.2.1), Mask (Default 255.255.255.0), Default Gateway (Default 0.0.0.0),  
 
Primary DNS (Default 0.0.0.0), Secondary DNS (Default 0.0.0.0). 
Note:
 See Appendix A – Table of Commonly Supported Subnets. 
Auto Dialout Configuration 
Auto Dialout: 
Check the box to enable/disable Auto Dialout. Default = Enable. 
Raw Dialout: 
Check the box to enable/disable raw mode for an Auto Dialout session. Default = Disable. 
Auto Dialout Login: 
Check the box to enable or disable Auto Dialout Login feature. Default = Enable. 
Auto Dialout Port: 
Enter the serial Auto Dialout Port number. Default = 5000. 
Handle EIA Signal:  
Check the box to enable/disable the EIA standard signal characteristics (time and  
 
 duration) used between different electronic devices.  
 
Inactivity:   
Enter the time in seconds that the auto dialout session will stay active before going inactive. 
  
 
Syslog Configuration 
Syslog:  
Check the box to enable or disable Syslog. Default = Disable. 
Syslog Server IP Address: 
If a Remote Syslog Server IP Address is specified, the syslog feature acts as a 
remote Syslog.  
Auto Discovery 
Auto Discovery: 
Check the box to enable or disable Auto Discovery to broadcast (MAC level), the MAC 
Address, IP Address, and DHCP information to the configured server port.  Default = Enable. 
Server Port: 
Enter the Server Port Number. Default port is 1020. 
Broadcast Timer: 
Enter the amount of time in seconds for the auto-discovery packet granularity of periodic 
broadcasting. Default is 10 seconds. 
Auto Reboot Timer Configuration 
Auto Reboot Timer: 
Enter the number of hours to lapse between each automatic reboot. The default of zero 
deactivates the timer. Range is 0 to 999. 
Telnet Configuration 
Enables/Disables the Telnet port. The default is Enable.
 
Submit Button 
Click the Submit button to save these settings. 
Note: 
You must click Save and Restart once you have 
completed and submitted all the screens on which you have made changes. 
 
IP Setup > HTTP Configuration 
 
HTTP Configuration 
HTTP Port: 
Enter the port number on which the HTTP server will listen for requests. Default is 80. 
Authentication 
User Name: 
Enter the User Name that can access to the Web Management software. Default is admin. 
Password:
 Enter the Password for access to the Web Management software. Default is admin.  
Note:
 You should change the password to one of your choosing. It can be up to 12 characters. Use a safe 
password. Your first name spelled backwards is not a sufficiently safe password; a password such as xfT35$4 
is better.  
Submit Button 
Click the Submit button to save these settings. 
Note: 
You must click Save and Restart once you have 
completed and submitted all the screens on which you have made changes.