Maxon Telecom MM-6864 User Manual
MM6854/64 Dual Band GSM Data Modem
Issue 1.0
ME 820047
03/00
Page 13
5.1.3 ATA – Manually answer an incoming call
The modem does not automatically answer an incoming call (Default setting). The ATA command
causes the modem to go off-hook when the modem rings:
causes the modem to go off-hook when the modem rings:
Enter
ATA
Response
The modem will answer the incoming call
Notes: None
Result codes: None
Notes: None
Result codes: None
5.1.4 ATD – Dial a telephone number
This command will dial the number entered after the ATD command:
Response
The modem dials the telephone number 12345678
Connect 14400 (Selected speed)
Connect 14400 (Selected speed)
Enter
ATD12345678<CR>
Notes:
As soon as the modem detects the carrier from the GSM base
station, it returns the CONNECT result code. Data transmission
can now begin.
As soon as the modem detects the carrier from the GSM base
station, it returns the CONNECT result code. Data transmission
can now begin.
The following characters are valid in a dial string: The digits
from “0” to “9”, and “+” for making International calls. The +
must be at the beginning of the number.
from “0” to “9”, and “+” for making International calls. The +
must be at the beginning of the number.
Result codes:
ERROR
NO CARRIER
CONNECT<selected speed>
Mobile equipment result code
NO CARRIER
CONNECT<selected speed>
Mobile equipment result code
5.1.5 ATDL
This command will dial the last number, which the modem dialled:
Enter
ATDL<CR>
Response
12345678 where 12345678 was the last number dialled.
Connect 14400 (Selected speed)
Notes: None
Result codes:
Connect 14400 (Selected speed)
Notes: None
Result codes:
ERROR
NO CARRIER
CONNECT<selected speed>
Mobile equipment result code
NO CARRIER
CONNECT<selected speed>
Mobile equipment result code