Zoom 1065 User Manual
24
ADSL X5 User Guide
To Connect a Network Device
This section provides general instructions for connecting a network
device (such as a wireless access point, router, hub, or switch) to
the X5. For information about setting up your network device,
please refer to the documentation that came with that device.
device (such as a wireless access point, router, hub, or switch) to
the X5. For information about setting up your network device,
please refer to the documentation that came with that device.
1
Plug one end of an Ethernet cable into one of the modem’s
ETHERNET ports (1, 2, 3, or 4) and the other end into the
network device’s Ethernet port. (For a hub or a switch, this is
typically called an Uplink or Expansion port. For a router or
wireless access point, this is typically called a WAN port.)
ETHERNET ports (1, 2, 3, or 4) and the other end into the
network device’s Ethernet port. (For a hub or a switch, this is
typically called an Uplink or Expansion port. For a router or
wireless access point, this is typically called a WAN port.)
2
Set up your network. Refer to the documentation provided
with your particular network device for instructions on how to
do this.
with your particular network device for instructions on how to
do this.
3
Once your network is set up, reboot any computer that is part
of the network. For example, if you are connecting a wireless
access point, reboot any computer that will use the wireless
network.
of the network. For example, if you are connecting a wireless
access point, reboot any computer that will use the wireless
network.
4
Verify that your Internet connection is working. Open your
Web browser on each computer using your network and try to
connect to a familiar Web address.
Web browser on each computer using your network and try to
connect to a familiar Web address.
Congratulations! You have connected your network device to the
Internet. You are done with this user’s guide. Enjoy your X5!
Internet. You are done with this user’s guide. Enjoy your X5!