Aztech Systems 56K Leaflet
Step 1: Setting up your Modem
This section will guide you through the installation of your modem. Just follow the
instructions below and you will have your modem installed in minutes.
5
6
7
8
Contents
Package ........................................................................... 2
Knowing your Modem ....................................................... 3
Step 1: Setting up your Modem ......................................... 5
Step 1: Setting up your Modem ......................................... 5
Step 2: Installing the Modem Driver ................................... 7
2.1 For Windows® XP .................................... 7
2.2 For Windows® Me .................................... 8
2.3 For Windows® 98 / 98 SE ....................... 10
2.4 For Windows® 2000 .............................. 11
2.4 For Windows® 2000 .............................. 11
For Windows® 95 ................................... 13
Step 3: Verifying Your Modem .......................................... 14
Uninstalling Your Modem Driver ....................................... 15
Uninstalling Your Modem Driver ....................................... 15
56K External
Modem
AC Power Adapter
Serial Port Cable
Telephone Extension Cable
Installation CD
For problems encountered during setting up or running your
modem, please refer to the
modem, please refer to the
Frequently Asked Questions
and/or
Troubleshooting Guide
located in the
\Manuals
folder on your
Installation CD.
Package
If you found any missing items, please contact your dealer immediately.
(The actual cables that are included with your package may differ in appearance from
country to country)
country to country)
Power off your computer and any connected devices before
setting up your modem!
setting up your modem!
1.
Connect the Male Plug of the Serial Port
Cable to the Serial Port Jack on the modem.
2.
Connect the Female Plug of the Serial Port
Cable to the 9-pin serial port on your com-
puter.
(The location of your computer's serial port
may differ from the illustration on the next
may differ from the illustration on the next
page. Refer to your computer's user guide for
the exact location of the serial port.)
If you do not have a 9-pin port free, you would
require a 9-to-25-pin converter.
If your modem doesn't require a telehone jack
If your modem doesn't require a telehone jack
connection, please procced to Step 4
3.
Connect a telephone set (Telephone Set For US and Asia Pacific Model) to the Phone Jack
on the modem .
4.
Connect one end of the Telephone Extension Cable to the Line Jack on the modem.
5.
Connect the other end of the Telephone Extension Cable to a Telephone Jack on the wall.
6.
Connect the AC Power Adapter Jack to the Power Jack on the modem.
7.
Connect the AC Power Adapter Plug to an electrical outlet.
(The AC Power Adapter Plug in your modem package may differ from the illustration above.
However, the connection procedure is still applicable.)
3.
Select Search for the best driver in
these locations.
these locations.
Check the box Include this location
in the search.
Click Browse and navigate to
in the search.
Click Browse and navigate to
'\WinXP' folder on your CD-ROM
drive.
4.
During installation, the following may be prompted. This happens when a newer driver is
detected. Click Continue Anyway.
detected. Click Continue Anyway.
5.
At the prompt for country setting, select the Com port that the modem is connected to and the
country that you are currently in. Click OK.
6.
Click Finish to complete the installation.
This completes the installation of the modem driver in Windows
®
XP.
2.2 Installing the Modem Driver - ForWindows® Me
1.
Power on the modem. The power LED indicator lights up on the modem's front panel.
2.
Power on your computer to start Windows. It will detect your newly connected modem and
an Add New Hardware Wizard will appear.
an Add New Hardware Wizard will appear.
Place the Installation CD onto your CD-ROM drive. Select the option Specify the location of
the driver and click Next.
3.
Select Specify a location.
Click Browse and navigate to '\Winme' folder on the Installation CD.
Click Browse and navigate to '\Winme' folder on the Installation CD.
4.
During installation, the following may be prompted. This happens when a newer driver is
detected. Click Continue Anyway.
detected. Click Continue Anyway.
Step 2: Installing the Modem Driver
2.1 Installing the Modem Driver - For Windows® XP
1.
Power on the modem. The power LED indicator lights up on the modem's front
panel.
2.
Power on your computer to start Windows. It will detect your newly-connected modem and an Add
New Hardware Wizard window will appear.
Place the Installation CD onto your CD-ROM drive. Click Install from a list or specific location
Place the Installation CD onto your CD-ROM drive. Click Install from a list or specific location
(Advanced) and click Next.
Product warranty does not apply to damage caused by lightning, power surges or wrong voltage usage.
Easy Start
Version 1.0
Version 1.0
56K External Modem
2
3
4
Front Indicators
!
POWER
Lights up when power is supplied to the
modem.
"
In-Use
Lights up when modem is in use.
#
DATA
Flickers up when the modem is transmitting
/ receiving data.
/ receiving data.
!
"
#
EM3950-W Series (Without Speakerphone Features)
Back Panel Indicators
EM3950-W Series (With Speakerphone Features)
Knowing your Modem
Familiarize yourself with the various parts of your modem. This will be useful during the
installation later on.
installation later on.