IBM MT 2675 User Manual
1100 Endurimer and system-digi cable
Notes about the optional leather cover
v
Scratching or discoloration of the leather cover is
not covered under warranty.
not covered under warranty.
v
When removing and replacing the leather cover,
be very careful not to scratch the surface of the
Endurimer material.
be very careful not to scratch the surface of the
Endurimer material.
Do not subject the system-digi cable to tension, especially
at the base of the cables of the connectors shown in figure
at the base of the cables of the connectors shown in figure
a
. Tension could cause the cable to snap.
Note: When replacing the Endurimer or the system-digi
cable, make sure that the black connector of the
system-digi cable is attached to the computer and
the white connector is attached to the digital
notepad assembly.
system-digi cable is attached to the computer and
the white connector is attached to the digital
notepad assembly.
For the process of changing the cover from right-handed
orientation to left-handed orientation, see “4010 Changing
the orientation of a left- or right-handed model” on
page 124.
orientation to left-handed orientation, see “4010 Changing
the orientation of a left- or right-handed model” on
page 124.
v
Battery pack (1010)
v
Hard-disk drive and hard-disk drive cover (1040)
v
Digital-pen holder kit (1070)
v
Computer side (1080)
v
ThinkScribe digital notepad assembly (1090)
Removing and replacing a FRU
ThinkPad TransNote
85