IBM 600/600E (2645) User Manual

Page of 124
Related Service Information
independent of the operating system, so the
computer might behave differently from your
setting if you set the low-battery alarm. The
computer chooses appropriately between your
setting and the default setting.
Note:  The computer cannot enter suspend mode if it is
attached to a docking station.
The following events cause the computer to resume
operation from suspend mode:
Ÿ
The Fn key is pressed.
Ÿ
The LCD cover is opened.
Ÿ
The ring indicator (RI) is signaled by a serial device
or PC Card device.
Ÿ
The power switch is turned on.
Ÿ
The resume timer is set. In Windows 95, you can set
the time with the Resume on timer selection in the
Power Management Properties window. In Windows
98, the Scheduled Tasks setting has priority over the
Resume on timer selection in the Power
Management Properties window.
Note:  The computer does not accept any event
immediately after it enters suspend mode.
Therefore, wait a few seconds before taking
any action to reenter operation mode.
 Hibernation Mode
For the Windows NT User
A Windows NT user cannot create a hibernation file in
a Windows NT system that uses the NTFS format
system, the Windows NT default format. If you want
to use hibernation mode, you should reinstall Windows
NT with a FAT format system.
In hibernation mode, the following occurs:
Ÿ
The system status, RAM, VRAM, and setup data are
stored on the hard disk.
Ÿ
The system is powered off.
Notes:
1. In the ThinkPad Configuration program, the
computer can be set to suspend/hibernate
while docked.
2. The computer cannot enter hibernation mode
when:
Ÿ
It is powered with ac power and a
communication PC Card is used.
   
General Descriptions
27