IBM 4400 User Manual
130
Chapter
5
Configuring the Proprinter III XL Emulation with Control Codes
Expanded (Double Wide) Print (One Line Only)
ASCII Code SO
ESC SO
Hex Code
0E
1B 0E
Dec Code
14
27 14
Purpose
Selects double wide print for one line only.
where:
If the emulation is set at 10 cpi, it is set to 5 cpi.
If the emulation is set at 12 cpi, it is set to 6 cpi.
If the emulation is set at 17.1 cpi, it is set to 8.55 cpi.
If the emulation is set at 12 cpi, it is set to 6 cpi.
If the emulation is set at 17.1 cpi, it is set to 8.55 cpi.
Comment
This expanded print control code is a line-by-line print attribute;
when the SO control code is received, the current line is printed
double wide and automatically reset.
when the SO control code is received, the current line is printed
double wide and automatically reset.
This control code can be reset by a paper motion control code
(LF, VT, CR, etc.), by the DC4 (double wide cancel) code, CAN
or ESC W (double wide print). When set by SO, double wide
print is not cancelled by the Autowrap feature.
(LF, VT, CR, etc.), by the DC4 (double wide cancel) code, CAN
or ESC W (double wide print). When set by SO, double wide
print is not cancelled by the Autowrap feature.
Example
The following sample illustrates Expanded Print for one line only.
Another example of expanded printing is shown for “Expanded
(Double Wide) Print,” ESC W on page 129.
Another example of expanded printing is shown for “Expanded
(Double Wide) Print,” ESC W on page 129.
Expanded (Double Wide) Print Reset (1 Line)
ASCII Code DC4
ESC DC4
Hex Code
14
1B 14
Dec Code
20
27 20
Purpose
Cancels expanded (double wide) print set by SO.
where:
If the emulation is set at 5 cpi, it is set to 10 cpi.
If the emulation is set at 6 cpi, it is set to 12 cpi.
If the emulation is set at 8.55 cpi, it is set to 17.1 cpi.
If the emulation is set at 6 cpi, it is set to 12 cpi.
If the emulation is set at 8.55 cpi, it is set to 17.1 cpi.