IBM 4400 User Manual
Superscript/Subscript Printing
55
Superscript/Subscript Printing
ASCII Code SFCC S
n
Hex Code
SFCC 53
n
Dec Code
SFCC 83
n
Purpose
Selects superscript or subscript printing.
where:
n = 0 to enable superscript printing (hex 00 or hex 30)
n = 1 to enable subscript printing (hex 01 or hex 31)
Comment
Superscript/Subscript font prints at one-half the normal vertical
character height and at twice the normal vertical density. When
the superscript/subscript control code is received, all characters
are superscript or subscript until reset by the superscript/
subscript reset control code or printer reset. Emphasized print is
ignored in the superscript/subscript print mode.
character height and at twice the normal vertical density. When
the superscript/subscript control code is received, all characters
are superscript or subscript until reset by the superscript/
subscript reset control code or printer reset. Emphasized print is
ignored in the superscript/subscript print mode.
When the BS feature is enabled from the control panel, both
superscript and subscript characters can be printed in the same
character column using the Backspace (BS) control code (page
30).
superscript and subscript characters can be printed in the same
character column using the Backspace (BS) control code (page
30).
Caution should be used when combining Superscript or
Subscript printing with other print attributes such as Elongated
(Double High), or small line spacing; overlapping lines may
occur. Characters with different horizontal or vertical dot
densities do not overlap.
Subscript printing with other print attributes such as Elongated
(Double High), or small line spacing; overlapping lines may
occur. Characters with different horizontal or vertical dot
densities do not overlap.
Example
The following sample illustrates superscript/subscript printing.
Superscript/Subscript Printing Reset
ASCII Code SFCC T
Hex Code
SFCC 54
Dec Code
SFCC 84
Purpose
Resets superscript and subscript printing.