IBM 4400 User Manual
92
Chapter
4
Configuring the Serial Matrix Emulation with Control Codes
Delete
ASCII Code DEL
Hex Code
7F
Dec Code
127
Purpose
Deletes the previously received character on a line.
Comment
Characters that have been truncated due to line length
restrictions are not affected by this code.
restrictions are not affected by this code.
Elongated (Double High) Print (One Line Only)
ASCII Code ESC h
Hex Code
1B 68
Dec Code
27 104
Purpose
Selects elongated (double high) character printing for one line
only. Elongated characters are approximately double height but
standard width.
only. Elongated characters are approximately double height but
standard width.
Comment
The elongated character control code is a line-by-line print
attribute; when the control code is received, one entire line of
elongated characters is printed and then automatically reset.
attribute; when the control code is received, one entire line of
elongated characters is printed and then automatically reset.
When using this feature with relative line slewing, the paper
position is moved
position is moved
n + 1 lines rather than n lines. See Chapter 9,
“Vertical Page Formatting,” for more information on relative line
slewing. When using small line spacing and the lines overlap, an
unexpected print format may result.
slewing. When using small line spacing and the lines overlap, an
unexpected print format may result.
Example
The following sample illustrates elongated character printing.