Epson 386/33 PLUS User Manual

2. There are two or three holes on each side of the disk drive.

When you insert the drive, align the appropriate round

holes in the drive with the two oval holes on each side of

the drive bay, as shown below.

oval holes

3. Slide the drive into the lower drive bay, toward the back of

the subassembly. Watch the oval holes on the side of the

drive bay so you can see when the holes on the drive are

positioned in the middle of them.

If you are installing a diskette drive, adjust its position so that

the front of the drive lines up with the drive in the upper

bay. (A hard disk drive fits all the way into the bay.)