IBM T410S User Manual
Table 18. Removal steps of wireless USB adapter or Intel Turbo Memory
Note: Step
1
is only for models with the wireless USB adapter. For models with the Intel Turbo Memory Minicard,
skip step
1
.
In step
1
, unplug the jack by using the removal tool antenna RF connector (P/N: 08K7159) or pick the connector
with your fingers and gently unplug them in direction of the arrow.
When installing: In models with the wireless USB adapter, route the antenna cable as shown in this figure and plug
the cable firmly into the jack on the adapter.
the cable firmly into the jack on the adapter.
Step
Screw (quantity)
Color
Torque
2
M2 × 6 mm, flat-head, nylon-coated (2)
Silver
0.181 Nm
(1.85 kgfcm)
(1.85 kgfcm)
1100 Palm rest or palm rest with fingerprint reader
For access, remove these FRUs in order:
•
•
•
Chapter 8
.
Removing and replacing a FRU
91