IBM 750X (9545) User Manual
1090 Speaker Shield Assembly
1095 Interposer Card
Battery Pack (1020)
Diskette Drive (1030)
Hard Disk Drive (1035)
Keyboard Unit (1040)
Status Indicator (1060)
LCD Assembly (1070)
Modem Card (1080)
Warning: Carefully remove any metal particles that might
have flaked off. Be careful not to damage it with a
screwdrivers, screws, or other objects.
screwdrivers, screws, or other objects.
.2/
When replacing the speaker shield, insert it under
the projection at the left, rear corner of the computer
base.
the projection at the left, rear corner of the computer
base.
Note: The shaded part in the figure is attached to
the speaker shield assembly with light
adhesive. This is a separate FRU from the
speaker shield assembly.
adhesive. This is a separate FRU from the
speaker shield assembly.
.3/
When raising the speaker shield assembly, make
sure that the shield assembly does not hook the
three flexible cables of the keyboard.
For Model 360, gently raise the speaker shield
assembly to avoid damaging the speaker cable. (For
Models 355 and 355Cs, skip step
sure that the shield assembly does not hook the
three flexible cables of the keyboard.
For Model 360, gently raise the speaker shield
assembly to avoid damaging the speaker cable. (For
Models 355 and 355Cs, skip step
.3/
; the speaker
cable has already been removed.)
ThinkPad 355x, 360x, 370C, 750x, 755C, 755Cs
253