Toshiba SATELLITE P500 User Manual

x

User’s Manual

3. The standard connecting arrangement (telephone jack type) for this 

equipment is jack type(s): USOC RJ11C.
The IC registration number of the modem is shown below.

Canada: 3652B-RD02D450

Modems connected to the Australian telecoms network must have a valid 

Austel permit. This modem has been designed to specifically configure to 

ensure compliance with Austel standards when the country/region selection 

is set to Australia. The use of other country/region setting while the modem 

is attached to the Australian PSTN would result in you modem being 

operated in a non-compliant manner. To verify that the country/region is 

correctly set, enter the command ATI9 which displays the currently active 

setting.
To set the country/region permanently to Australia, enter the following 

command sequence:

AT+GCI=09

Failure to set the modem to the Australia country/region setting as shown 

above will result in the modem being operated in a non-compliant manner. 

Consequently, there would be no permit in force for this equipment and the 

Telecoms Act 1991 prescribes a penalty of $12,000 for the connection of 

non-permitted equipment.