APC AP9312TH User Manual

Environmental Monitoring Unit: User’s Guide

Menu Items

Network

continued

SNMP

The SNMP section displays the SNMP access control and trap receiver
Settings.

Access Control .

The Access Control section of SNMP displays the

current settings for all four SNMP channels and lets you configure
values for a selected channel.

Trap Receiver.

The Trap Receiver section of SNMP displays and lets

you configure the current settings for all four trap receivers.

Continued on next page

Item

Definition

SNMP Access

Enables or disables

SNMP

access.

Access Control

Controls access to each of the four

SNMP

channels.

Trap Receiver

Defines the

NMSs

(up to 4) to which traps are sent.

Item

Definition

Community
Name

Password that the

NMS

specified by the

NMS IP

option must use

for

SNMP

access to the unit. The

Access Type

option defines

the allowed access.

Note:

Allows a maximum of 15 characters.

NMS IP

Configures the channel to allow only one

NMS

(using a specific

NMS IP

address), or all

NMS

s (using

0.0.0.0

for the

NMS IP

value), to have access to the channel.

Access Type

Defines whether the

NMS

identified by the

NMS IP

option can

write (use

GET

s and

SET

s) or read (use only

GET

s) or is disabled

(cannot use

GET

s or

SET

s ).

Item

Definition

Community Name

The password that the unit uses when it sends traps to the
NMS identified by the

Receiver NMS IP

option.

Maximum length:

15 characters.

Receiver

NMS

The specific

NMS

(defined by its

address) to receive traps

sent by the unit.

Note:

To send no traps to any

NMS

, set the Trap Receiver

0.0.0.0

Trap Generation

Enables or disables the sending of traps to the

NMS

identified by the

Receiver NMS IP

option.

Authentication Traps

Enables or disables the sending of authentication traps to
the

NMS

identified by the

Receiver NMS IP

option