APC AP9606 User Manual
Web/SNMP Management SmartSlot Card User’s Guide
12
Front Panel
Features
The front panel has the following features:
•
Reset button
•
10Base-T network cable connector
•
Link-RX/TX LED
•
Status LED
Reset Button.
Allows you to reset the Management Card
while power
is on.
10Base-T Port.
Used to connect the Management Card to the Ethernet
network.
Link-RX/TX LED.
Indicates the network status.
Status LED.
Indicates the status of the Management Card.
Condition
Description
Off
The device which connects the Management Card to the network is
turned off or it is not operating correctly.
turned off or it is not operating correctly.
Flashing
The Management Card is receiving data packets from the network.
Condition
Description
Off
The Management Card has no power.
Solid Green
The Management Card has valid network settings.
Flashing Green
The Management Card does not have valid TCP/IP settings.
1
Solid Red
A hardware failure has been detected in the Management Card.
Contact APC Technical Support as described in
Contact APC Technical Support as described in
Flashing Red
The Management Card is making
BOOTP
requests. If you do not
use a BOOTP server, you need to configure the Management
Card’s TCP/IP settings.
Card’s TCP/IP settings.
1
1 For information about how to configure the three TCP/IP settings that the
Management Card needs to operate on the network, see the Web/SNMP
Management SmartSlot Card Installation and Quick Start Manual provided in
printed format, and in PDF format on the APC Web/SNMP Management Card utility
CD (.\doc\Insguide.pdf).
Management SmartSlot Card Installation and Quick Start Manual provided in
printed format, and in PDF format on the APC Web/SNMP Management Card utility
CD (.\doc\Insguide.pdf).