APC Command Line Interface User Manual

Command Line Interface (CLI) User’s Guide

Outlet Commands

off

Syntax:

           all
off       outlet|range[,outlet|range...]

Description:

Turn off one or more outlets. If you

specify more than one outlet, the outlets will turn
off approximately at the same time. However, for
close synchronization, outlets must be configured
as part of a synchronized outlet group.

Parameters:

Example:

off 1,5-7

Output Format (for the preceding example):

OK
1: Database Server: Outlet turned off.
5: Disk Array PS 1: Outlet turned off.
6: Disk Array PS 2: Outlet turned off.
7: Disk Array PS 3: Outlet turned off.

Example:

off “Web Server”

Output Format (for the preceding example):

OK
2: Web Server: Outlet turned off.
3: Web Server: Outlet turned off.

Error Messages:

E101, E104

all

The value all turns off all outlets of the

Switched Rack PDU. This value is not case-

sensitive.

outlet An outlet name or number. If you specify a

name that contains a Space character, you

must enclose the name in quotation marks.

range A range of outlet numbers, with a hyphen

separating the starting number from the

ending number.