Compex Technologies WLP54G User Manual

 
1.  Power on your PC and your system will detect new hardware 

automatically. Click Cancel to terminate the driver installation. 

 

 

 

2.  Insert the Product CD into your computer CD-ROM drive. The 

CD will auto-run, displaying the Compex page. Then go to 
UTILITIES to select the setup.exe 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
3.  The system will then run the RaLink2_RT2500 setup.exe 

automatically. Click  Next>  to proceed. 

 

 

 
4.  Follow the instructions stated on the screen. The system will 

prompt you if you need to select your location country. For 
example, if you are in Singapore, just select Singapore. Click OK 
to proceed. 

 

 

 

5.  Click Finish to complete the utility installation. At the same time, 

your system has installed the driver to your computer.  

 

However, you will notice that the RALINK Wireless Utility 
screen appears automatically, together with the RALINK 
Wireless Network Card Setup. Before you can configure the 
Utility program, first exit the latter by clicking Finish.  

 

 

 

If you wish to exit the utility program, simply go to the taskbar 
and place your cursor on the icon (as circled in red). Then click 
on the right button of your mouse to select Exit from the main 
menu.  

 

 

 

 
To check if the driver has been successfully installed to your system, 
 
6.  Proceed to your desktop, right click on My Computer and select 

Properties. 

 

7.  Select Hardware tab and click on Device Manager. 
 

 

 
 
8.  Ralink RT2500 Wireless LAN Card will appear in the Network 

Adapters section. This indicates that the drivers for Compex 
iWavePort  WLP54G has been successfully installed to your 
system.