Silex Technology SX-550 User Manual

 

Setting Configuration Parameters 

silex 

Page 37 

Part Number 40183-101 

2.  Verify the settings, as defined in Table 21. 
 

IP Address 
Resolution 

Sets the exchanges among network interfaces connected to an 
Ethernet media segment and maps IP address to Ethernet 
addresses, Media Access Control (MAC) addresses and hardware 
addresses. 

The Set Permanent radio button sets the IP address permanent. 
The IP address must follow the format XXX.XXX.XXX.XXX, where 
each XXX is a number between 0 and 255.  

The Use Network Protocol Select radio button determines which IP 
address at power up.  

Subnet Mask 

Sets the address of the subnet mask 
The subnet mask must follow the format XXX.XXX.XXX.XXX, 
where each XXX is a number between 0 and 255. The default 
subnet mask is 0.0.0.0. The server interprets a subnet mask of 
0.0.0.0 or 255.255.255.255 as no subnet mask specified.  

Default Gateway 

Sets the default gateway, if your network is attached to other 
networks 

WINS Server 
 

Sets the Windows Internet Naming Service (WINS) address 
Values are set by user.  

Use DHCP to 
Locate WINS 
Server 

Uses the automatic location feature in ExtendView to locate the 
WINS servers. 
 

 
 
3.  To change the Telnet/HTTP password, click Telnet/HTTP Password. The Change Password window 

displays. 

 

 

Type the new password in the New Password field, then in the Verify Password field. 

Click OK to change the password or click Cancel to exit. 

4. Click 

Advanced TCP/IP. The Advanced TCP/IP Configuration window displays.