Socket Mobile IB810 User Manual

 

 
Power is provided to the IB810 CPU card with the J2 and J12 ATX power 
connectors. Please note that the J12 external ATX power connector 
should be connected to the backplane for IB810 to function. J12 is 
located below the IDE connector. Please refer to the figure below.  

 

 
The IB810 CPU card is integrated with a MicroPCI socket that uses 
SO-DIMM 144-pin connectors. These sockets can accommodate the 
optional MicroPCI daughter cards. 

To insert the MicroPCI daughter cards, position it at 30

°

 to the PCB and 

gently push it into the MicroPCI connector (See Figure 1 below). The 
card will not fit when inserted at an angle of 45

°

 or 15

°

. Once inserted, 

slowly press the card towards the PCB until it locks on both sides to the 
clips of the connector. Screw the card to the PCB to secure the 
installation. To remove the MicroPCI card, pull the ‘clips’ sideways as 
shown in Figure 2 below.  

Figure 1.

Figure 2.