TP-LINK TL-WN7200N User Manual

 

- 17 -

 

1)  Enter a PIN from my Access Point   

Choose the Config Mode as Registrar and enter the PIN of AP into the field under the Pin Code 

as Figure 3-10 shown. And then click PIN button to start the wireless connection without doing 

any configuration for AP. 

 

Figure 3-10 QSS - Registrar mode 

)

The default PIN code of the AP always can be found in its label or User Guide. 

2)  Enter the PIN into my Access Point 

Choose the Config Mode as Enrollee and click the PIN button on the screen as Figure 3-11. 

Meanwhile, enter the PIN code of the adapter into the configuration utility of the AP. For the 

detailed instructions of the AP configuration, please refer to the User Guide of the AP. 

 

Figure 3-11 QSS - enrollee mode 

)

The PIN code of the adapter is displayed on the QSS configuration screen as Figure 3-11 (the 

default PIN code for this adapter is 08781949 as Figure 3-11 shown)