Thecus Technology i Series User Manual

 

  

 

 
 
 

 

Before power off, it is better to execute “Shutdown” to flush 
the data from cache to physical disks. 

 
 

 
The system buzzer features are describing in the following: 
 

1.  The system buzzer alarms 1 second when system boots up 

successfully. 

2.  The system buzzer alarms continuously when there is error level event 

happened. The alarm will be stopped after mute. 

3.  The alarm will be muted automatically when the error situation is 

resolved. E.g., when RAID 5 is degraded and alarm rings immediately, 
after user changes/adds one physical disk for rebuilding, and when the 
rebuilding is done, the alarm will be muted automatically. 

 
 

 

The LED features are describing as follows: 

1.  Marquee/Disk Status/Disk Rebuilding LED: The Marquee/Disk 

Status/Disk Rebuilding LEDs are displayed in the same LEDs. The 
LEDs behave for different functions in different stages. 

I. 

: When system powers on and succeeds to boot 

up, the Marquee LED acts until the system is booting successful. 

II. 

: the LEDs reflect the disk status for the tray. 

Only On/Off situation. 

III. 

: the LEDs are blinking when the disks are 

under rebuilding.  

2.  Disk Access LED: Hardware activated LED when accessing disks (IO). 
3.  Disk Power LED: Hardware activated LED when the disks are plugged 

in and powered. 

4.  System status LED: Used to reflect the system status by turn on the 

LED when error occurs or RAID malfunctioning happens. 

5.  Management LAN port LED: GREEN LED is for LAN transmit/receive 

indication. ORANGE LED is for LAN port 10/100 LINK indication. 

6.  BUSY LED: Hardware activated LED when the front-end channel is 

busy. 

7.  POWER LED: Hardware activated LED when system is powered on. 

 

- 14 -