Thecus Technology 1U4500R User Manual

DHCP Configuration

A DHCP server can be configured to assign IP addresses to devices connected to
the LAN port. To configure these ports, choose LAN from the Network menu.

DHCP Configuration

Item Description
DHCP Server

Enable or disable the DHCP server to automatically assign IP

address to PCs connected to the LAN interface.

Start IP

Specifies the starting IP address of the DHCP range.

End IP

Specifies the ending IP address of the DHCP range.

DNS Server

Specifies the DNS server IP address.

Web Services Configuration

From the Network menu, choose the
Service item, and the Web Service screen

appears. This screen displays the service
support parameters of the system. You can

change any of these items and press Apply
to confirm your settings. A description of

each item follows:

Web Service

Item Description
HTTP (WebDisk)

Support

Enable or disable WebDisk support. Enter the port number if this

option is enabled.

HTTPs (Secure

WebDisk) Support

Enable or disable secure WebDisk support. Enter the port if this

option is enabled.

SMB/CIFS

Enable or Disable SMB/CIFS protocol for Windows, Apple, Unix

drive mapping.

UPnP

Enable or disable Universal Plug and Play protocol. UPnP helps to
find the IP address of the 1U4500.

NOTE

The IP Segment of WAN and LAN should not overlap.

WARNING

The IP address of the LAN interface should not be in the range of the Start IP

address and End IP address.

NOTE

• Disable HTTP support and Enable Secure HTTP support to guarantee secure

access.

• In some environments, due to security concerns, you may wish to disable

SMB/CIFS as a precaution against computer viruses.