Trendnet TW100-W1CA User Manual
- 16 -
Figure 18: COM 1 Properties
8.
Power up the product.
How to start Telnet
1.
The instructions below are for using this unit at its default settings (i.e. DHCP enabled,
Local Port IP address: 192.168.1.254, Subnet: 255.255.255.0).
Local Port IP address: 192.168.1.254, Subnet: 255.255.255.0).
2.
Go to Start? Run.
Figure 19
3.
Type “telnet 192.168.1.254 333” and click on OK. If the local port’s IP address was set
to something other than the factory default (“192.168.1.254”), enter that IP address.
to something other than the factory default (“192.168.1.254”), enter that IP address.