Planet Technology ADE-3100 User Manual

The products and programs described in this User

’s Manual are licensed products of

PLANET Technology, This User

’s Manual contains proprietary information protected by

’s Manual and all accompanying hardware, software, and documen-

tation are copyrighted.

No part of this User

’s Manual may be copied, photocopied, reproduced, translated, or

reduced to any electronic medium or machine-readable form by any means by electronic or
mechanical. Including photocopying, recording, or information storage and retrieval systems,
for any purpose other than the purchaser's personal use, and without the prior express
written permission of PLANET Technology.

Disclaimer

PLANET Technology does not warrant that the hardware will work properly in all environ-
ments and applications, and makes no warranty and representation, either implied or
expressed, with respect to the quality, performance, merchantability, or fitness for a particu-
lar purpose.

PLANET has made every effort to ensure that this User

’s Manual is accurate; PLANET

disclaims liability for any inaccuracies or omissions that may have occurred.

Information in this User

’s Manual is subject to change without notice and does not represent

a commitment on the part of PLANET. PLANET assumes no responsibility for any inaccura-
cies that may be contained in this User

’s Manual. PLANET makes no commitment to update

or keep current the information in this User

’s Manual, and reserves the right to make im-

provements to this User

’s Manual and/or to the products described in this User ’s Manual, at

any time without notice.

If you find information in this manual that is incorrect, misleading, or incomplete, we would
appreciate your comments and suggestions.

FCC Compliance Statement

This  equipment  generates  and  uses  radio  frequency  energy  and  if  not  installed  and  used
properly, that is, in strict accordance with the instructions provided with the equipment, may
cause  interference  to  radio  and  TV  communication.  The  equipment  has  been  tested  and
found  to  comply  with  the  limits  for  a  Class  A  computing  device  in  accordance  with  the
specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reason-
able  protection  against  such  interference  in  a  residential  installation.  However,  there  is  no
guarantee  that  interference  will  not  occur  in  a  particular  installation.  If  you  suspect  this
equipment is causing interference, turn your Ethernet Switch on and off while your radio or
TV  is  showing  interference,  if  the  interference  disappears  when  you  turn  your  Ethernet
Switch  off  and  reappears  when  you  turn  it  back  on,  there  is  interference  being  caused  by
the Ethernet Switch.

You can try to correct the interference by one or more of the following measures:
w Reorient the receiving radio or TV antenna where this may be done safely.
w To the extent possible, relocate the radio, TV or other receiver away from the Switch.
w Plug the Ethernet Switch into a different power outlet so that the Switch and the receiver

are on different branch circuits.

If necessary, you should consult the place of purchase or an experienced radio/television
technician for additional suggestions.

CE mark Warning

The is a class B device, In a domestic environment, this product may cause radio interfer-
ence, in which case the user may be required to take adequate measures.