NDC comm NWH6210 User Manual

Upgrade Firmware 

The WWB’s or WEC’s embedded software (firmware) is burned into the flash 

ROM.    However, an updated firmware can be installed over your LAN via the 

IWMS program.  Click on Upgrade Firmware.  The Upgrade Firmware dialog 

box will open (Figure 29).   

Use the Browse button to choose the file to be uploaded to the WWB or WEC, or 

type the file name and path in the Select File field. 

 

The Upgrade button will then become enabled.    Click Upgrade to start uploading 

the file to the WWB.    The IWMS and the WWB’s (or WEC’s) built-in Trivial 

File Transfer Protocol (TFTP) command will upload the new executable into the 

WWB’s or WEC’s flash memory area.    If the upload activity fails, an error 

message will be shown on the message box. When the file transfer is complete, 

click Close to close the window.     

 

    InstantWave 

47