Nokia 12 GSM MODULE REMOTE I/O User Manual

 

 

Note: If an alias is defined, the default command will be disabled. There can be 
only one effective command or alias for each function at a time. An alias must not 
be equal to a default command. 

Empty aliases cannot be used. If an empty alias is set, the default command will 
remain effective. 

 

Note: The alias string must be unique and the maximum length is 24 characters. 
Neither commands nor aliases are case sensitive. However, the message identifier 
and password are. 

 

OUTPUT x: ON 

Alias for output x on state, x = pin number 1-9 

OUTPUT x: OFF 

Alias for output x off state, x = pin number 1-9 

INPUT x: *

 

Alias for input x voltage *, x = pin number 1-3

 

INPUT x: ON 

Alias for input x on state, x = pin number 4-11 

INPUT x: OFF 

Alias for input x off state, x = pin number 4-11 

* The value of the sampled voltage will be added to the end of the response. The value of the sampled voltage is 
between 0 – 2800 mV, for example:  

 

All example commands in this chapter use the “term123” identifier string, and 
the password property is set off in all of the subsequent chapters. 

 

Note: If a command or the alias defined for it is not identified, but the identifier and 
the optional password are correct, the Nokia 12 GSM Module will send an error 
message as a response to the command originator, for example: 

Control message: 

term123 passWORD ResetAll

   

Response:  

ERROR (Unknown Command)

Use the Change_Pword command to control the password. Note that all 
example commands in this chapter use the “term123” identifier string (see 
Table 6). 

 

 

 

 

29/49