Liebert XDK User Manual
Equipment Inspection, Handling And Storage
10
4.3
Storage
• If the XDK’s packaging has been removed, cover it with tarpaulins to protect against particulates,
such as sand and dust, and from moisture.
• Keep storage temperature between -22°F and 104°F (-30°C and +40°C).
• The heat exchanger must be completely drained to prevent the risk of freezing damage.
• When stored for more than 12 months, turn fans by hand to check the fan bearings prior to instal-
• The heat exchanger must be completely drained to prevent the risk of freezing damage.
• When stored for more than 12 months, turn fans by hand to check the fan bearings prior to instal-
lation.
4.4
Returning the Unit in Case of Damage
If the XDK is not returned in its original packaging, the packaging used for return must comply with
the following:
• There must be at least 1-3/16" (30mm) space between the unit and the packaging.
• Footprint of the skid shall extend at least 2-1/2" (64mm) from the perimeter of the unit.
• The XDK must be attached to the skid using original metal brackets or steel banding.
• Footprint of the skid shall extend at least 2-1/2" (64mm) from the perimeter of the unit.
• The XDK must be attached to the skid using original metal brackets or steel banding.
If steel banding is used to hold unit to the skid, place reinforced protective material between the
banding and the XDK.
• Ensure proper shipping information is affixed to the exterior of the packaging.