Emulex EMULEX User Manual

dynamic: no
   desc: Select Fibre Channel topology

-----------------------------------------------------------------
  label: link-speed
    min: 0
current: 0
    max: 4
default: 0
dynamic: no
   desc: Select link speed

-----------------------------------------------------------------
  label: num-nodes
    min: 2
current: 512
    max: 512
default: 512
dynamic: no
   desc: Number of fibre channel nodes (NPorts) the driver will support.

-----------------------------------------------------------------
  label: cr-delay
    min: 0
current: 0
    max: 63
default: 0
dynamic: no
   desc: A count of milliseconds after which an interrupt response is generated

-----------------------------------------------------------------
  label: cr-count
    min: 1
current: 1
    max: 255
default: 1
dynamic: no
   desc: A count of I/O completions after which an interrupt response is 
generated

-----------------------------------------------------------------
  label: assign-alpa
    min: 0x0
current: 0x0
    max: 0xef
default: 0x0
dynamic: no
   desc: Assigns a preferred ALPA to the port. Only used in Loop topology.

-----------------------------------------------------------------
  label: adisc-support
    min: 0
current: 1
    max: 2
default: 1
dynamic: yes
   desc: Sets the Fibre Channel ADISC login support level.

-----------------------------------------------------------------
  label: pm-support
    min: 0
current: 1
    max: 1
default: 1
dynamic: no
   desc: Enables power management support.

Gets the value of a specified parameter in the driver.