Wayne-Dalton WDSF-10 User Manual

Adding another controller to your 

network as a secondary controller 

is similar to the procedure “Adding 

modules to the Network” (see page 

8-9), but put the target controller 

into JoIN NeTWoRk, ReCeIVe 

CoNFIGURATIoN, or RePLICATIoN 

ReCeIVe mode. 

1.  From the Design tab, press the 

ADD DeVICe button.  A message 

window will ask you to press the 

button on the device to add.

2.  Place the secondary controller 
into ReCeIVe RePLICATIoN or CoPY 
FRoM mode.  (Please see the User 

Manual or Instruction Manual for 

the specific Z-Wave

®

 controller 

being programmed for detailed 
programming information.)

If the operation is successful, 

a message window will appear 

stating that the device has been 

successfully added.  Repeat this 

procedure if a message window 

states that the module failed to be 

included.  There is No icon for a 

secondary controller.

NoTe:  For your security, the USB 

Z-Wave

®

 Adapter must be within 3 

feet of the controller to be added. 

NoTe: The process of adding a 

controller to a Z-Wave

®

 network 

is often referred to as SeND 

CoNFIGURATIoN or RePLICATIoN 

SeND mode.  The overall process 

is often called CoNTRoLLeR 

RePLICATIoN.

24



Press ADD DeVICe to add a secondary controller.

oN

oFF

1

2

3

4

5

6

DeLeTe

INCLUDe

example of 
Secondary 
Controller





Device added successfully message window. 

Initiate Secondary Controller to ReCeIVe RePLICATIoN.