Hayes Microcomputer Products PC Card User Manual
DIVA T/A PC Card Reference Guide 38
COM Port Configuration Commands—Continued
Command
Description
ATXn
Extended Result Codes: This command
selects which subset of the result messages will
be used by the DIVA T/A to inform the DTE of
the results from commands.
selects which subset of the result messages will
be used by the DIVA T/A to inform the DTE of
the results from commands.
n=0
Provide basic result codes: sends only OK,
CONNECT, RING, NO CARRIER, ERROR,
and NO ANSWER.
Provide basic result codes: sends only OK,
CONNECT, RING, NO CARRIER, ERROR,
and NO ANSWER.
n=1
Provide basic result codes and appropriate
connection speed (e.g., CONNECT 2400,
CONNECT 19200).
Provide basic result codes and appropriate
connection speed (e.g., CONNECT 2400,
CONNECT 19200).
n=2
Provide basic result codes, connection speed,
and DIALTONE detection (default).
Provide basic result codes, connection speed,
and DIALTONE detection (default).
n=3
Provide basic result codes, connection speed,
and BUSY signal detection.
Provide basic result codes, connection speed,
and BUSY signal detection.
n=4
Sends all messages.
Sends all messages.
n=5
Terminal screen displays the remote number
along with the RING message. If the remote
number is not known the message UNKNOWN
is displayed.
Terminal screen displays the remote number
along with the RING message. If the remote
number is not known the message UNKNOWN
is displayed.
AT\Vn
Connect Message Control: This command
controls the format of connection messages
controls the format of connection messages
n=0
Upon connection, the DIVA T/A reports the
DTE speed only; for example, CONNECT
19200 (default).
Upon connection, the DIVA T/A reports the
DTE speed only; for example, CONNECT
19200 (default).
n=1
Upon connection, the DIVA T/A reports the
DCE speed, the protocol, and the DTE speed
(same as ATW2).
Upon connection, the DIVA T/A reports the
DCE speed, the protocol, and the DTE speed
(same as ATW2).